SMAART Operator meeting – Linköping – 09.10.2025

EURO 100,00

Workshop Overview

The workshop assumes participants have a working knowledge of SMAART version 8 or later.

Content:
This one-day workshop (10:00–16:00) covers:

  • Subwoofer array optimization
  • SPL measurement using SMAART SPL, SMAART v9 ST, and 10EaZy
  • WHO guidelines on safe listening environments
  • Intro to measurement microphones and wireless systems
  • In-ear monitoring system measurements (approx. 1 hour)
  • nerdy discussions and networking

Brands featured: MELLab, iSEMcon, SLS Audio, 10EaZy, and SMAART v9.

Location:
Soundforce Lindköping, Sweden https://www.soundforce.se/

Instructor: Thomas Züllich, Anders Molund

Language:
English

Equipment: None required

Fee:
Workshop fee includes participation and refreshments (coffee and non-alcoholic beverages). Accommodation not included.


Registration (required) !!!!

The workshop is limited to 24 participants. Reserve your place by purchasing a ticket.

100% free for SMAART Operators:
If you’ve previously completed a SMAART Operator course, you can attend for free. The webshop will recognise your status when logged in.
Unsure of your status? Check the directory:
SMAART Operator Directory


Discounts

Available for workshop attendees:

  • 10% off on a SMAART v9 ST perpetual license via tz audio (you will get a voucher code at the seminar)
  • buy a 10EaZy class 2 and get a free upgrade to class 1 on top – you save 500 Euros
  • special prices on selected hardware (see below)

Please pre-order hardware to have it ready for pickup at the workshop. You must show up and pick up your prepaid order.


Invoicing & Delivery

Invoices will be issued via our bookkeeping system.

When placing your order, choose “Pick up” as freight choice.

Software will be delivered electronically after you have participated at the seminar.

 

24 in stock

special offer for seminar participants

MYc-3 kit w/case

Omni-directional pre-polarized* condenser microphone 48V 

MYc-3 matched pair

Omni-directional pre-polarized* condenser microphone 48V
Units selected with sensitivity within +/- 0.5 dB between 10 Hz and 20 kHz.

MYc-3 matched triple

Omni-directional pre-polarized* condenser microphone 48V
Units selected with sensitivity within +/- 0.5 dB between 10 Hz and 20 kHz.

MYc-3 matched quad

Omni-directional pre-polarized* condenser microphone 48V
Units selected with sensitivity within +/- 0.5 dB between 10 Hz and 20 kHz.

TX-3 kit w/adapters & bag

TX-3 microphone with clamp, cables & bag. Calibration file available on MELLab website.

TX-3

Omni-directional pre-polarized* condenser microphone

Polarity: a positive pressure variation on the diaphragm produces a positive voltage at pins 3 and 4 of the TA4F

Adapter for 1/4″ microphones to 1/2″ calibrators

Adapter for 1/4″ microphones to 1/2″ calibrators

MiEMi m7

10EAZY Class 2

10EAZY CLASS 2

The brochure says: No hassle, no experience needed. Install the software, connect the dedicated hardware, and you are ready to go.

Good old fashioned, Windows only system. True, it's  simple to use, if you are up to paying premium for simplicity, then this is for you. Otherwise have a look at SMAART SPL here, in our opinion very much the same for much less of the cost.

About 1 week delivery time.

Category:

You may also like…